Lambretta · 1947–1950
Lambretta A and B: history and buying advice
The first scooters from the Innocenti factory in Lambrate.
History
Ferdinando Innocenti had a large steel-tube factory in Milan, which was heavily bombed during the war. Afterwards he wanted to make a simple, cheap means of transport. The name Lambretta comes from Lambrate, the district where the factory stood, named after the little river Lambro.
In 1947 came the Lambretta A: an open scooter without panels, with a 123.7 cc two-stroke, three gears with a foot pedal and no rear suspension. In 1948 the B followed, with a hand change on the handlebars and a sprung rear wheel.
Key data
| Engine | 1 cylinder, two-stroke |
|---|---|
| Capacity | 123.7 cc |
| Gears | 3; A with foot change, B with hand change |
| Suspension | A: no rear suspension; B: with rear suspension |
| Years | A 1947–1948; B 1948–1950 |
What to check when buying
- These are rare and expensive scooters. Have authenticity and numbers checked by a Lambretta club.
- Many parts have been reproduced; ask what is original.
- Check whether it really is an A or a B (foot or hand change, with or without rear suspension).
- Check the tubular frame for cracks and welds.
- Fill up with premix and start carefully after a long lay-up.
SourcesWikipedia: Lambretta (English)Cybermotorcycle: Lambretta (English)
Looking for parts for this model? See what is on offer on eBay right now.
Parts on eBay ↗Partner link: if you buy through this link, Classic Moto Fix receives a small fee from eBay. You pay nothing extra.