Aermacchi Cigno 125

Aermacchi · 1951–1953

Aermacchi Cigno 125: history and buying advice

Half scooter, half motorcycle: with the Cigno, Aermacchi started building two-wheelers in 1951.

Nederlandse versie

History

After the MB1 three-wheeler, the Aermacchi aircraft factory in Varese came up with a two-wheeler. Lino Tonti designed it, and at the end of 1950 it was shown at the Milan show. His wife thought it looked like a swan, and so it was named Cigno (swan).

The Cigno was a cross between a scooter and a motorcycle. It had a legshield like a scooter, but big 17-inch wheels. The horizontal two-stroke engine, gearbox and drive pivoted together and moved with the rear wheel. The two exhaust pipes doubled as the rear swingarm. Behind the legshield was a toolbox you could raise as a dummy tank; it then looked more like a motorcycle.

The Cigno was sold from 1951 to 1953. Then came the Monsone and the Ghibli, which built on the same idea.

Key data

EngineSingle-cylinder two-stroke, horizontal, air-cooled, 123 cc (52 × 58 mm)
Power4.5 hp at 4500 rpm
Gears3, with hand change on the handlebar
Suspensionfront: leading-link fork with one shock; rear: the whole engine moves with the wheel
Tyres3.00 × 17
Weightc. 70 kg
Top speedc. 80 km/h
DesignerLino Tonti
Production Cigno 125N1951–1955; number: c. 1700; frame numbers from: 125001
Production sourceWith thanks to the late Jaap de Jong, Aermacchi de gevleugelde (1912–1972), Weesp 2003. The author himself warns that not all data are certain.

What to check when buying

  • Parts for these early two-strokes are rare. Above all check that the bike is complete; missing body parts are almost impossible to find.
  • Compare the frame number with the papers. The old Italian numbering is not always clear; if in doubt ask the Aermacchi club for help.
  • Turn the engine over with the kick-starter: it must have compression and turn freely, without a scraping sound.
  • A premix two-stroke: ask which mixing ratio the owner used and whether the bike stood for a long time.
  • Check the rubbers and pivots of the rear suspension: the whole engine hangs from them.
To the workshop guide NL

SourcesMoto Collection F-M. Dumas: Cigno (French)Cybermotorcycle: Aermacchi scooters (English)Aermacchimoto.com: model list (Italian)Wikipedia: Lino Tonti (English)

← Back to all motorcycles and guides